A ( 1 : 2 )
A
HINGE PIN LOCATING HOLE
QUICK RELEASE BUTTON
HINGE COVER PLATE X 2
HINGE PLATE X 2
BOLTS X 2
RUBBER SEATING WASHER X 2
EXPANDING BUSH X 2
1. Take the parts out of the poly bag and remove the hinge cover plate from the hinge plate.
2. Place the rubber seating washer underneath the hinge plate using the locating lugs.
3. Place the bolt through the slot in the hinge plate.
4. Clip the hinge assemblies into the hinge pin locating holes (leave the bolts in place) in the back of the toilet seat. Ensuring to leave off the
hinge cover plate.
5. Place the expanding bushes into the seat bolt holes in the W.C pan.
6. Place the seat into position on the W.C using the bolts to locate into the expanding bushes, adjust the seat to fit the W.C, lift up the seat and
tighten down the bolts in the expanding bushes.
7. Unclip the seat from the hinges by pressing in the quick release button, the bolts can be tightened further at this stage if necassary. Replace
the hinge plate covers and seat.
STR010/DTR010/LTR020 QUICK RELEASE SOFT CLOSE TOILET SEAT
INSTRUCTION